Frequently Asked Questions

Is requesting a quotation free? +

Short answer: Is requesting a quotation free? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

How long does a quotation take? +

Short answer: How long does a quotation take? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

Can custom concrete or cement specimen moulds be made? +

Short answer: Can custom concrete or cement specimen moulds be made? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

What is a concrete specimen mould? +

Short answer: What is a concrete specimen mould? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

What is the difference between cube and cylinder specimens? +

Short answer: What is the difference between cube and cylinder specimens? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

What does TS EN 12390-1 cover? +

Short answer: What does TS EN 12390-1 cover? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

Where is a 150×150×150 mm cube mould used? +

Short answer: Where is a 150×150×150 mm cube mould used? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

When should an Ø100×200 mm cylinder mould be selected? +

Short answer: When should an Ø100×200 mm cylinder mould be selected? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

What is a BMC concrete specimen mould? +

Short answer: What is a BMC concrete specimen mould? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

How do I choose between 2200 g and 2800 g cube moulds? +

Short answer: How do I choose between 2200 g and 2800 g cube moulds? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

How is a specimen released with compressed air? +

Short answer: How is a specimen released with compressed air? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

Should a concrete mould be cleaned after every use? +

Short answer: Should a concrete mould be cleaned after every use? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

Is a release agent required? +

Short answer: Is a release agent required? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

How are mould dimensions checked? +

Short answer: How are mould dimensions checked? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

How long can a concrete specimen mould be used? +

Short answer: How long can a concrete specimen mould be used? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.

Can concrete specimen moulds be used on site? +

Short answer: Can concrete specimen moulds be used on site? should be answered by checking the current project specification, the referenced test method and the exact mould data. Product selection should consider specimen geometry, target dimensions, daily casting volume, demoulding method and the laboratory workflow. Looking at the product name alone is not sufficient for a reliable purchasing decision.

Points to verify

• Confirm the specimen shape and internal dimensions
• Record the product code, material and body weight
• Check the current edition of the referenced method
• Plan cleaning, inspection and spare mould requirements

Keep the internal surface clean, place and compact concrete according to the applicable procedure, identify the specimen clearly and maintain the required curing conditions. A mould does not determine compressive strength by itself, but damaged geometry, hardened residue or severe wear may affect specimen dimensions and surface quality. Inspect the body and the compressed-air inlet regularly. Do not use hammers, chisels or other impact tools to force the specimen out. If visible distortion or cracking is found, remove the mould from routine use until its condition and internal dimensions have been checked.

Before ordering, the laboratory and purchasing team should use the same full description. “Concrete specimen mould” alone is ambiguous; state cube or cylinder geometry, exact internal size, product code, body weight and quantity. Verify the latest edition of the sampling, preparation, curing and testing procedures rather than treating general product information as a substitute for a standard. On delivery, check quantity, packaging, visible damage and product identification before use. Laboratories with a high daily casting volume should include spare moulds in their planning so that a damaged unit does not interrupt the specimen programme.

AYKOMSAN KALIP product pages list size, material, weight and product code separately. For project quantities, include daily use, spare mould requirements, delivery city and requested date so that the quotation can be prepared accurately. Review the product category or request a quotation.